IFM Electronic Serie E3 Montageanleitung Seite 5

• Clamp sensor and adapter
into a clamping device (D).
The sealing chamfers (E) must
not be damaged. Tighten the
sensor with a spanner until
you can feel the end stop.
Note: If you continue to turn,
this can have adverse effect
on the sealing.
• Hand tighten the eccentric
element (G) on the adapter
with the screw (F).
• Fix the sensor with the
eccentric element and tighten
the socket head screw.
Mount sensor + adapter to the
process connection by means of
a clamp.
F
G
D
E