Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ONE TOUCH
This appliance is equipped with One Touch technology that allows
you to interact, via the App, with smartphones based on Android
operating system and equipped with NFC
(Near Field Communication) function.
• Download on your smartphone the Hoover Wizard App.
The Hoover Wizard App is available for devices running
both Android and iOS, both for tablets and for
smartphones. However, you can interact with the
machine and take advantage of the potential offered
by Smart Touch only with Android smartphones
equipped with NFC technology, according to following
functional scheme:
Android smartphone with
NFC technology
Android smartphone
without NFC technology
Android Tablet
Apple iPhone
Apple iPad
FUNCTIONS
The main functions available using the App are:
• Fine Temperature Level Setting – To set temperature level also
by intermediate steps (0,5; 1; 1,5; 2; 2,5; 3; 3,5; 4; 4,5)
• Super Boost – To activate an additional boost to cool down
quickly both fridge and freezer.
• Eco Mode – Automatically the entire refrigerator is setted on
level 2 (+5°, -18°)
• Reports – Cooling statistics and tips for a more efficient use
of your machine.
• Clever Care – Direct link to User Manual and help on line.
Get all the details of the Smart Touch functions,
browsing the App in DEMO mode or go to:
www.hooveronetouch.com
HOW TO USE ONE TOUCH
FIRST TIME - Machine registration
• Enter the "Settings" menu of your Android smartphone and activate
the NFC function inside the "Wireless & Networks" menu.
Depending on the smartphone model and its Android
OS version, the process of the NFC activation may be
different. Refer to the smartphone manual for more
details.
• Turn on the One Touch button on the User Interface by pressing 2
seconds to enable the NFC antenna on the Sky Led. The One Touch
label switches on.
• Open the App, create the user profile and register the appliance
following the instructions on the phone display or the "Quick Guide"
attached on the machine.
DeMore information, F.A.Q. and the video for an easy
registration are available on:
www.hooveronetouch.com/how-to
Interaction with the
machine + contents
Contents only
Contents only
Contents only
Contents only
NEXT TIME – Regular usage
• Every time you want to manage the machine through the App,
first you have to enable the One Touch mode by turning on
the One Touch button.
• Make sure you have unlocked your phone (from stand-by mode) and
you have activated the NFC function; then, follow the steps
mentioned earlier.
• If you want to activate a function (e.g. Super Boost cycle),
select it in the App.
• Follow the instructions on the phone display, KEEPING IT ON
the One Touch logo on the Sky Led, when requested to do so
by the App.
NOTES:
Place your smartphone so that the NFC antenna on
its back matches the position of the One Touch logo
on the appliance (as illustred below).
If you do not know the position of your NFC antenna,
slightly move the smartphone in a circular motion over
the One Touch logo until the App confirms the
connection. In order for the data transfer to be
successful, it is essential TO KEEP THE SMARTPHONE
ON THE DASHBOARD DURING THESE THE FEW
SECONDS OF THE PROCEDURE; a message on the
device will inform about the correct outcome of the
operation and advise you when it is possible to move
the smartphone away.
Thick cases or metallic stickers on your smartphone
could affect or prevent the transmission of data
between machine and telephone. If necessary,
remove them.
The replacement of some components of the
smartphone (e.g. back cover, battery, etc...) with
non-original ones, could result in the NFC antenna
removal, preventing the full use of the App.
The management and the control of the machine via
App is only possible "by proximity": it is therefore
not possible to perform remote operations (e.g.:
from another room; outside of the house).
EN 16
Werbung
