Pin Assignments; Pin Assignment For Strain Gauge Sensors With Mv Signal; Pin Assignment For Active Sensors With ±5V Or With ±10V Signal; Pin Assignment For Active Current Sensors With 0 - Tecsis EZE22 Bedienungsanleitung

Bedienungsanleitung/Operating manual
EZE22
4

Pin Assignments

4.1

Pin Assignment for Strain Gauge Sensors with mV Signal

Description Pin (6 pole socket)
0V / GND
5V
Shield
Signal +
Signal
–
Control
4.2 Pin Assignment for Active Sensors with ±5V or with ±10V Signal
Description Pin (12 pole socket)
0V / GND
12V
Signal +
Signal
–
Control
Shield
4.3 Pin Assignment for Active Current Sensors with 0 .. +20mA Signal
Description Pin (12 pole socket)
0V / GND
12V
Signal +
Signal
–
Control
Shield
4.4

Pin Connection for the USB-Interface

The pin connection of the USB-Interface corresponds to the DIN IEC 61076-3-108 Standard. (Mini-B)
16
Color
1 green
2 brown
3 shielding
4 yellow
5 white
6 grey
Color
E green
F brown
C yellow
D white
K grey
M shielding
Color
E green
F brown
C yellow
D white
K grey
M shielding
BD_BE 936_VASUSB
Remark
ground reference for 5V and 12V excitation
excitation for 5V strain gauge sensors
do not connect shield with sensor housing
positive signal input
negative signal input
if available in sensor
Remark
ground reference for 4V and 12V excitation
excitation for 12V active sensors
signal input
relating to signal input (internally 0V / GND)
if available in sensor
do not connect shield with sensor housing
Remark
ground reference for 12V excitation
excitation for 12V active sensors
signal input
relating to signal input (internally 0V / GND)
if available in sensor
do not connect shield with sensor housing
www.tecsis.de