vlahova RB3538 Gebrauchsanweisung Seite 30

 The Alarm2 time can be set according to the same method above.
F.Y.I.:
 If there is no valid operation within 20 seconds, it will automatically return to normal time mode from the alarm
time set mode.
 When adjusting the value, press and hold the
 The Alarm will sound for 2 minutes if you do not deactivate it by pressing any button.
Switching off the alarm signal
 When it's ringing, press any button except the SNOOZE button to stop the Alarm sound.
 When it's ringing, press and hold the SNOOZE button for 2 seconds to stop the Alarm sound.
Snooze function
 When it's ringing, press the SNOOZE button once the alarm sounds to get to snooze mode, when the set snooze
time is over, it will ring again.
RF Transmission Procedure
 The main unit automatically starts receiving transmission from remote sensor for outdoor temperature &
humidity after batteries inserted.
 The remote sensor will automatically transmit temperature and humidity data to the main unit after batteries
inserted.
 If the main unit failed to receive transmission from remote sensor ("- -.-" and "- -" appears at the remote sensor
temperature and humidity display position ), press and hold the CH button for 2 seconds, RF icon will be
flashing，the main unit will rescan the launch signal of the channel.
°C /°F unit transfer
 Press the ℃/℉ button to select ℃ or ℉ units.
Query Maximum/minimum numerical value
 When the temperature and humidity are shown in the LCD, The main unit began to record temperature and
humidity maximum and minimum numerical value.
 Press once "MEM" button, the LCD will display maximum value of temperature and humidity, The LCD will display
the minimum value of temperature and humidity if press once "MEM" button again when the maximum value is
displayed.
 at the same time, there are "MAX" or "MIN" displayed on the LCD.
 The temperature and humidity maximum/minimum value will RE records after press and hold "MEM" button 2
seconds.
 The memory value of the day will be automatically cleared at 0:00 every night.
F.Y.I.:
 If the temperature reading is below ranges, the LL.L will be displayed. If the temperature reading is above ranges,
the HH.H will be displayed.
Weather forecasting function
 Please take the weather forecast from your local weather forecasting service into account as well as the forecast
from your weather station. If there are discrepancies between the information from your device and from the
local weather forecasting service, please take the advice of the latter as authoritative.
 The weather forecast is calculated from evaluation of fluctuations in the barometric pressure and may deviate
from the actual weather conditions.
 The weather station displays the following weather symbols:
or button to adjust continuously and quickly
30