vlahova RB3538 Gebrauchsanweisung Seite 29

 Press and hold the button "
set the RCC function is ON or OFF.
 Press the "
" button to confirm the item has been set and go to the next one, the sequence of setting items is as
follows:
RCC ON/OFF → DST ON/OFF → Time zone → HOUR → MINUTE → Format of DATE (D/M or M/D) → YEAR →
MONTH → DATE → Languages → Pressure unit → Pressure type(Relative/Absolute) → Relative pressure →
Weather forecast
 When adjusting the value, press and hold the "+" or "-" button to adjust quickly.
 Press "
"button to confirm the last item to end the setting procedures, then it will return to the normal mode.
 The relative air pressure value can only be set when the air pressure type is selected as relative air pressure.
 The 7 languages that show week abbreviations are listed below:
 When choosing the 12Hr format, if "AM" is displayed before the hours, it means that the hour is ante meridiem, if
"PM" is displayed before the hours, it means that the hour is post meridiem.
F.Y.I.:
 If there is no valid operation within 20 seconds, it will automatically return to normal time mode from the set
mode.
Setting the alarms
 Press button
, you can set Alarm1 and Alarm2 ON or OFF, symbol
appear means that ALARM2 is ON, symbol
 Press once button
LCD display Alarm2 time (5 seconds), press button
display.
 When Alarm1 time is displayed, press and hold button
flash, press the or
 Press button
to confirm the item has been set and go to the next one, the sequence of setting items is as
follows:
Hour of Alarm1 → Minute of Alarm1 → repeat period of Alarm1 → Snooze time of Alarm1
 When setting the repeat period, comply with the following rules:
M-F : From Monday to Friday
S-S : From Saturday to Sunday
: From Monday to Sunday
 The snooze time can be set to 1-30 minutes or OFF, if "OFF" is selected, it means that the snooze function is
turned off.
" for 2 seconds, the "
, LCD display Alarm1 time (5 seconds), press button
buttons to set the required Hour.
ON/OFF " starts to flash, and press the "+" or "-" buttons to
or disappear means that Corresponding ALARM is OFF.
again when Alarm2 time is displayed, return to current time
for 2 seconds until Hour of the Alarm1 time starts to
appear means that ALARM1 is ON, symbol
again when Alarm1 time is displayed,
29