MT Logic RC-3500A Bedienungsanleitung Seite 11

HL_TT9310 MT-Logic.book Page 11 Tuesday, January 27, 2015 4:41 PM
really low rate, around 134 bits per second (the code is 23 bits long). Only the PMR's of the
latest generation will support DCS. There are 83 available DCS codes that can be used.
Since earlier models will only support CTCSS it will be better to use DCS to prevent that other
users will be audible during your PMR conversations.
12.7.1 CTCSS
12.7.2 DCS
To disable CTCSS or DCS, select code "00" for CTCSS or for DCS in the
menu. When the entry is confirmed, "OF" will be displayed.
12.8 Monitor
You can use the monitor feature to check for weaker signals in the current channel.
• Press the -button and
• Press the -button to stop channel monitoring.
During channel monitoring the receiver circuit in the PMR will not listen to
CTCSS or DCS codes.
Twintalker 9310
• Press the -button twice: "CTCSS" and the current
CTCSS code flashes on the display.
• Press the -button or the
code.
• Press the PTT-button
mode.
• Press the -button three times: "DCS" and the current
DCS code flashes on the display.
• Press the -button or the
another code.
• Press the PTT-button to confirm and return to stand-by
mode.
-button simultaneously to activate channel monitoring.
Twintalker 9310
-button to change to another
to confirm and return to stand-by
-button to change to
11