Progress PG0863 Benutzerinformation Seite 8

8 Progress
CONTROL PANEL
Power indicator light
1
Temperature regulator and On/Off
2
switch
FastFreeze light
3
Switching on
1. Insert the plug into the wall socket.
2. Turn the Temperature regulator
clockwise to a medium setting.
If the temperature inside the appliance is
too high, the Alarm light will blink and the
acoustic alarm will turn on.
3. Push the FastFreeze switch and the
acoustic alarm will turn off. The Alarm
light will blink until the internal
temperature has reached a level
required for the safe conservation of
frozen food.
Switching off
1. Turn the Temperature regulator to the
"O" position.
The Power indicator light will switch off.
2. Remove the plug from the wall socket.
Temperature regulation
The temperature is regulated
automatically. However, you can set a
temperature inside the appliance yourself.
Choose the setting keeping in mind that
the temperature inside the appliance
depends on:
• room temperature,
• frequency of opening the door,
• quantity of food stored,
• appliance location.
1 2 3 4 5
FastFreeze switch and alarm reset
4
switch
Alarm light
5
A medium setting is generally the most
suitable one.
To operate the appliance:
1. Turn the temperature regulator
clockwise to obtain a lower
temperature inside the appliance.
2. Turn the temperature regulator
counterclockwise to obtain a higher
temperature inside the appliance.
FastFreeze function
The FastFreeze is used to perform pre-
freezing and fast freezing in sequence of
Freezer compartment. This function
accelerates the freezing of fresh food and,
at the same time, protects foodstuffs
already stored from undesirable warming.
To freeze fresh food activate
the FastFreeze function at least
24 hours before placing the
food to complete pre-freezing.
To switch on the function:
1. Press the FastFreeze button for 2-3
seconds to activate the FastFreeze
function. The FastFreeze light will
switch on.
2. Place the food in the freezing
compartment and keep the FastFreeze
function switched on for further 24