8. Erstinbetriebnahme
Sperr-Level
Der Umfang der Bedienung des Gerätes
kann einge schränkt werden.
Aktivierung der Sperrfunktion
1. Gerät vom Netz trennen (z.B. durch
Ausschalten der Sicherungen)
2. Brücke auf die Leistungselektronik
aufstecken (siehe Bild)
3. Gerät wieder in Betrieb nehmen
Deaktivieren der Sperrfunktion
1. Gerät vom Netz trennen (Sicherungen
ausschalten)
2. Brücke entfernen
3. Gerät wieder in Betrieb nehmen
17
8. Initial operation
Lock level
The operating mode of the appliance can
be restricted.
Activation of the Lock level
1. Disconnect the appliance from the
power supply (e.g. by switching off
the fuses)
2. Insert the jumper on the power elec-
tronics (see picture)
3. Put the appliance into operation again
Deactivation of the Lock level
1. Disconnect the appliance from the
power supply (e.g. by switching off the
fuses)
2. Remove jumper
3. Put the appliance into operation again
CLAGE