RP Pump RP WAVEMAKER 6000 L Gebrauchsanweisung Seite 2

EN : Manual RP WAVEMAKER 6000 L – 12000 L
Congratulations on your purchase of this RP PUMP product. Please take a few minutes to read
through these instructions before using the device.
The low-maintenance Wavemaker flow pumps deliver a maximum flow rate with a strong and
broad current at extremely low energy consumption. These flow pumps provide a natural flow
that is indispensable in freshwater and especially in saltwater aquariums. Corals and some
specific fish species in particular require a natural flow in order to survive. These natural
conditions can be simulated in aquariums with the help of correctly positioned flow pumps. An
additional advantage is that the flow prevents sediment from settling to the bottom.
- easy installation and cleaning
- by means of the 45° rotatable holder with suction cup the pump can be placed in any desired
direction
- thanks to its compact shape, the Wavemaker takes up little space inside the aquarium
- suitable for both fresh and salt water
- corrosion-resistant carbon steel shaft
- all electronic parts are encapsulated in epoxy resin and thus perfectly protected
- not for use in combination with a time switch
Specifications
- maximum flow: 6.000 | 12.000 litres per hour
- power consumption: 12 | 24 Watts
- maximum water temperature: 35°C
- supplied with 135 cm power cable
Safety instructions
The appliance may only be used with a residual current circuit breaker with a tripping current
rating of up to 30 mA. This appliance is not intended for use by persons (including children)
with reduced physical or mental capabilities, or lack of experience and/or knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety. Children should be supervised to ensure that they do not play with
the appliance.
Always visually inspect the appliance before use. Do not use the appliance if any safety devices
are damaged or worn. Never override safety devices. Only use the appliance for the purpose
specified in these instructions for use. Never lift, transport or fasten the unit by the mains cable.
Make sure that the electrical plug connections are located in the flood-proof area or are
protected from moisture. Always disconnect the mains plug before working on the unit. Avoid
exposing the unit to a direct stream of water or rain.
The operator is responsible for compliance with local safety and installation regulations.
Consult a qualified electrician if necessary. In the event of a failure of the unit, repair work may
only be carried out by a qualified electrician.
Read all safety information and instructions. Failure to follow the safety instructions may result
in electric shock, fire and/or serious injury. Keep all safety information and instructions for
future reference.
Make sure that all pump parts are undamaged before switching on. Do not connect to voltage
sources whose voltage differs from that indicated on the unit.