Technical Data; Noise And Vibration; Instructions On Noise And Vibration Levels; Instructions On Noise Pollution - Unitec PREMIUM Originalbetriebsanleitung

Article number:
Nominal voltage:
Nominal power consumption:
Socket spanner attachment – square, size: 12,7 mm, ½"
Maximum torque:
Protection class:
IP protection class:
Idling rotation speed n
Socket spanner sizes:
Weight (net):
Acoustic pressure level L
Noise output level L
WA
Hand/arm vibration a
• Note: The noise and vibration levels have been measured in accordance with
EN 60745-1 and EN 60745-2-2.
• Note: The stated vibration level has been determined according to a
standardised test procedure and may be used to compare various power
tools with each other. This level is also suitable for estimating in advance the
stresses on the user resulting from vibration.
• Warning! Actual vibration levels may vary from those stated
depending on how you use the power tool.
• Take measures to protect yourself from vibration stresses. Take
into account here the entire work process, in other words also
including times at which the power tool is idling or switched off.
• Suitable measures include, among other things, regular
maintenance and care of the power tool and tool attachments,
keeping your hands warm, regular breaks and good scheduling
of the work processes.
10923_Schlagschrauber_BA_141205.indd 31
10923
230 V~, 50 Hz
710 W
300 Nm rotation to the left (loosening)
100 Nm rotation to the right
(tightening)
Class II
IPXO
: 2200 rpm
0
SW17, SW19, SW21 and SW22
3.23 kg
: 96.34 dB(A); K
PA
: 107.34 dB(A); K
: 19.652 m/s
h
a when working on
h
"Tightening screws and nuts
of max. permitted size"
: 3.0 dB(A)
PA
: 3.0 dB(A)
WA
; K: 1.5 m/s
2 2
10. Technical
data
10.1 Noise and
vibration
10.2 Instructions on

noise and vibration

levels
31
05.12.14 11:04