Changing Tyres - Unitec PREMIUM Originalbetriebsanleitung

2
Rotation to the left (R)
Rotation to the right (F)
Instructions on working:
• Loosening/tightening bolts, screws or nuts may require several
impacts.
• The longer you tighten a bolt, screw or nut, the more fi rmly it will
be seated. Avoid extended tightening to prevent damage to the
fi xing element or to masonry/brickwork.
• In particular you should note that smaller fi xing elements often
require less tightening.
• Oil, dirt, rust and other substances on threads or under screw
heads may affect the secure seating of fi xing elements.
Warning!
distance from socket spanners and moving parts.
Warning! Before switching between rotation to the right and
rotation to the left, let the motor come to a complete stop so as to
prevent damage to the motor or other parts of the tool.
Warning! Please follow the instructions on the use of this
product in the vehicle manufacturer's manual. Do not in any event
exceed the stated recommended levels. Tighten the wheel nuts
in accordance with the stated torque levels given in the vehicle's
operating instructions. Over- or under-tightened wheel nuts may
lead to the wheel coming off.
• Select a gear or put the automatic gears into "P". Lock the wheels with the
handbrake.
• Put the mains plug (2) into a suitable mains socket.
• Raise the vehicle with the vehicle manufacturer's original accessories and
tools. Strictly observe the manufacturer's operating instructions.
10923_Schlagschrauber_BA_141205.indd 27
Keep your hands and mains cables at a suffi cient

6.3 Changing tyres

27
05.12.14 11:04