Pekatherm 0120D R Benutzerhandbuch Seite 9

TROUBLESHOOTINHG TABLE
When the product is plugged in, the indicators of the control unit do not
light.
Check whether your mains socket has power, check whether the product is plugged in
correctly. Unplug the product and wait a few seconds, then plug it in again and push the
button on the control unit to the desired temperature setting.
The product does not warm up.
Make sure the product is operating by checking whether a LED indicator of the control
unit is lit. Remember that the safety AUTO-OFF function may have switched the product
off if the safety time period is over. If all the LED indicators are off, push the button to
switch the product on. In case of any doubt, reset the product by unplugging it from the
mains and plugging it in after a few seconds.
Remember that quick checks carried out with the product uncovered are not reliable.
Try cover the product with a blanket or a towel and wait at least 30 minutes. If you still
do not perceive heat, take the product to an authorized service centre.
After a period of proper functioning, the product stops warming, and all the
LED indicators go off.
In order to ensure safety in use, all products are provided with a safety AUTO-OFF
option which switches the product off after 12 hours continuous operation. See SAFETY
AUTO-OFF paragraph for details.
If you want to turn on the product, just push the button on the controller.
CLEANING
Before cleaning product remember to unplug it from the mains.
Do not try clean the product. Do not use strong detergents or cleaning agents containing
solvents.
Heating overblankets are hand or machine washable, after having detached the control
unit. The control unit is no washable. Prevent the control unit from getting wet or moist.
The product should not be used in case of wet or damp. If the product gets wet, do not
wring it out to dry it, do not use tumble dryers and never iron or switch the product on
to dry it. To dry the product extend it flat or hang it on a line avoid folding it.
Machine washing: select a programme for delicate garments, at 30°C.
Hand washing: use a soft detergent and rub or brush softly and always in the direction
of the internal wiring. Never wring the product.
After washing, to dry the product
9