Intended Use - Ryobi RBCLLG2 Bedienungsanleitung

Safety, performance,
dependability have been given
top priority in the design of your
cross line laser with grid marks.

INTENDED USE

The cross line laser with grid
marks is intended to be used only
by adults who have read and
understood the instructions and
warnings in this manual, and can
be considered responsible for
their actions.
The product is intended for
determining and
horizontal and vertical lines.
Do not use the product for
any other purpose. Use of the
product for operations different
from intended could result in a
hazardous situation.
CROSS LINE LASER
SAFETY WARNINGS
Laser radiation. Do not stare
into beam. Class 2 laser
product.
Risk of severe eye injury if
the laser beam is directed at
persons or animals. Avoid
direct eye exposure.
Do not direct the laser beam
towards other people.
Do not operate the product
around children
children to operate the laser.
Avoid using the product on
4
Original Instructions
and reflective surfaces. The laser
beam may be reflected at the
operator or other persons.
Store the product indoors
and avoid substantial knocks,
continuous
extreme temperatures.
Always keep the product away
from dust, liquids and high
humidity. They may damage
internal components or affect
accuracy.
If laser beam hits your eye,
you must close your eyes and
checking
immediately turn your head
away from the beam.
Do not position the laser beam
so that it unintentionally blinds
you or others.
Do not look into a laser beam
using
devices such as binoculars or
a telescope. This will increase
the level of eye injury.
If you use laser goggles to
enhance the visibility of the
laser beam, note that they will
not protect your eyes against
laser radiation.
Do not remove or deface
warning labels on the product.
Do
product.
or allow
Avoid heavy impact to or
dropping of the laser. The
accuracy of the laser should be
vibration
magnifying optical
not disassemble
or
the