Fassi PRO25F Bedienungsanleitung Seite 19

ASSEMBLY INSTRUCTIONS
Before you start assembling the unit, please check that all the specified parts are present. Some of the assembly steps
require heavy lifting. It is recommended that you have another
STEP 1:
The Front Stabilize (2) is fixed on the Main Body (1) with Hexagon socket screw (16), Flat washers (17), and fixed with
open wrench (20). Note: the move wheels of the Front Stabilize(2) are forward,as shown.
Similarly, the Rear Stabilizer (3) is fixed on the Main Body (1) with Hexagon socket screw (16), flat washers (17), and fixed with
open wrench (20).
Attention: The foot adjusters on the rear stabilizer (3) can adjust the machine to the ground smoothly.The moving wheels on
both sides of The Front Stabilize (2) can move the machine in a short distance.
16
17
16# 4pcs
17# 4pcs
20#
3
OPERATING INSTRUCTIONS
person assist you in
setting up this product
18
.
1
16
17
2