Useful Information; Caractéristiques Techniques; Déclaration De Conformité Ue - Atlas Copco Rdd15 Sicherheitshinweise

RDD15
extraction and wear respiratory protective equipment
when working with materials which produce airborne
particles.
• Some dust created by power sanding, sawing, grinding,
drilling and other construction activities contains chemi-
cals known to the State of California to cause cancer and
birth defects or other reproductive harm. Some examples
of these chemicals are:
• Lead from lead based paints
• Crystalline silica bricks and cement and other ma-
sonry products
• Arsenic and chromium from chemically-treated rub-
ber
Your risk from these exposures varies, depending on how
often you do this type of work. To reduce your exposure
to these chemicals: work in a well ventilated area, and
work with approved safety equipment, such as dust
masks that are specially designed to filter out microscopic
particles.
• Proceed with care in unfamiliar surroundings. Hidden
hazards may exist, such as electricity or other utility lines.
• This tool is not intended for use in potentially explosive
atmospheres and is not insulated from coming into con-
tact with electric power.
Signs and Stickers
The product is fitted with signs and stickers containing impor-
tant information about personal safety and product mainte-
nance. The signs and stickers shall always be easy to read.
New signs and stickers can be ordered by using the spare
parts list.
Information on Environmental Labeling of
Packaging
Material Abbreviation
High density poly- HDPE
ethylene
Polyvinyl chloride PVC
Low density poly- LDPE
ethylene
Polypropylene PP
Polystyrene PS
Polyurethane PU
Corrugated fibre- PAP
board
Non-corrugated fi- PAP
breboard
Paper PAP
Wood FOR
Paper and fibre- C/PAP
board/plastic
Numbering
2
3
4
5
6
7
20
21
22
50
81
© Atlas Copco Industrial Technique AB - 9836 5512 00
EU Decision 129/97/EC.

Useful Information

ServAid
ServAid is a portal that is continuously updated and con-
tains Technical Information, such as:
• Regulatory and Safety Information
• Technical Data
• Installation, Operation and Service Instructions
• Spare Parts Lists
• Accessories
• Dimensional Drawings
Please visit: https://servaid.atlascopco.com.
For further Technical Information, please contact your local
Atlas Copco representative.
Caractéristiques techniques
Données produit
Pression de service maximum 6.3 bar
Fréquence
Course
Poids
Déclarations
DÉCLARATION DE CONFORMITÉ UE
Nous, Atlas Copco Industrial Technique AB, SE-105 23
STOCKHOLM SWEDEN, déclarons sous notre seule et en-
tière responsabilité que le produit (dont le nom, le type et le
numéro de série figurent en première page) est en conformité
avec la ou les directives suivantes :
2006/42/EC
Normes harmonisées appliquées :
ISO 11148-4
Les autorités peuvent obtenir les informations techniques per-
tinentes en s'adressant à :
Aleksandra Duric, Product Compliance Manager, Atlas
Copco Industrial Technique AB, SE-105 23 Stockholm Swe-
den
Stockholm, 1 September 2023
Håkan Andersson, Managing Director
Signature du déclarant
Safety Information
90 psi
impacts par minute
11 mm, 0.43 po
2.7 kg, 6 lb
7