SPARE PARTS LIST
The following spare parts are available, please contact your supplier for pricing and ordering
information.
Replacement strap set
•
Replacement handset
•
Mains lead
•
Replacement actuator and control box combined
•
Aidapt mattress stopper with fixing strap and buckle
•
TECHNICAL INFORMATION
Product title
Weight without box
Maximum user weight
Overall size closed
(36"x28"x6") including actuator
Overall size open
(56¾"x28"x6") including actuator
Minimum lift
Maximum lift
Power supply
Power system
Handset and actuator approved to EN 50081-1 1992-01-31 and EN 50082-1-1992-30
•
Actuator and handset housing to IP 54 water ingress
•
Electric shock resistance and protection to Class II
•
Actuator and handset tested to EN 60601-1996-03
•
Mains cable with 13 Amp, 3 pin plug fuse to 3 Amp only
•
NB. Maximum user weight is based on maximum load of 143 kg.
REISSUE
If you reissue or are about to reissue this product, please thoroughly check all components for their
safety.
If in any doubt, please do not issue or use, but immediately contact your supplier for service
support.
CARE & MAINTENANCE
Maintain your Quiet Knight at regular intervals ensuring that all parts are moving freely and make sure
actuator is moving freely.
Also regularly check that the straps are secure and free from any wear.
When cleaning your Quiet Knight make sure to cover the actuator and remove the handset and mains
plug (from the wall).
Clean the metal frame and chrome extenders with a mild solution of water and detergent or use a
disinfectant to BS6424.
Usage and Maintenance Instructions
Quiet Knight Mattress Variator
14 kg (31lb)
190 kg (30 stone) uniformly distributed, fully opened
920 mmx710 mmx150 mm (WxDxH)
1440 mmx710 mmx150 mm (WxDxH)
10º
80º (overall) 67º (nett)
240 Volt 50 Hz to actuator
24 Volt DC
10
Ver. 2 07/2012 (1005)