Lionelo Timmy Bedienungsanleitung Seite 6

Correct unfolding will be signaled by a click.
Folding
To fold the scooter, press the fold button (fig. 4) and then pull the locking
mechanism (fig. 5) in the direction indicated by the arrow (fig. 1a). Then lower
the handlebars down (fig. 6) and fold the scooter (fig. 7).
LED light function
To activate the LED light in the platform of the scooter, press the button on the
bottom of the platform (9, fig. A).
Activation of the LED light in the front wheels is triggered by movement.
Braking
Braking takes place by pressing with your foot the brake located on the rear axle
of the scooter (7, fig. A).
Handlebars height adjustment
To adjust the height of the handlebars:
1.
Loosen the locking mechanism by turning it in a counterclockwise direction
(fig. 9).
2.
Press the height adjustment button (2, fig. A) and then set the selected
height of the handlebars (fig. 10).
3.
Make sure the height adjustment button has changed to a higher or lower
position. The correct position will be signaled by a click.
4.
Tighten the lock by turning it clockwise.
CLEANING AND MAINTENANCE
Clean the frame and all parts of the scooter with a damp cloth and a mild detergent. After
cleaning, wipe the scooter dry.
Do not use caustic or abrasive products to clean the product.
The photos are for illustrative purposes only, the actual appearance of the products may
EN
differ from those shown in the images.
‑ 6 ‑