Werbung
Verfügbare Sprachen
Verfügbare Sprachen
16. Do not pull the scooter behind a car or other vehicle.
17. Keep the product away from heat sources, high temperatures, hot surfaces,
sources of spark, open flames, oil and sharp edges.
18. Store the product in a dry place.
19. Keep plastic packaging away from children, as it poses a strangulation risk.
BATTERY WARNINGS
1.
Disposable, non-rechargeable batteries should not be charged.
2.
Do not insert different types of batteries or new and used batteries into
the device.
3.
Batteries must be inserted with the correct polarity.
4.
Dead batteries should be removed from the toy.
5.
The power supply terminals should not be short-circuited.
6.
If the product is not used for a long time, remove the batteries from the
compartment.
DESCRIPTION OF THE PARTS (FIG. A)
1.
Handlebars
2.
Height adjustment button
3.
Fold button
4.
Locking mechanism
5.
Wheels
BATTERY INSTALLATION IN THE PRODUCT
1.
Loosen the battery cover screw with a screwdriver. Remove the battery
cover (fig. 8).
2.
Insert three AA 1.5 V batteries. Pay particular attention to the correct polarity
of the batteries.
3.
Put the cover back on. Tighten the screw with a screwdriver.
USE
Unfolding
To unfold the scooter, pull the locking mechanism (fig. 1) in the direction indicated
by the arrow (fig. 1a) and then lift the handlebars upwards (fig. 2). Make sure the
scooter is correctly unfolded by gently pressing down on the handlebars (fig. 3).
6.
LED light
7.
Brake
8.
Battery compartment
9.
LED light button
‑ 5 ‑
EN
Werbung
