Step 3
The main frame of the trampoline is now
open.
The position of the elastic cords may be
asymmetrical, adjust if necessary.
Step 4
No tools are required for assembling the feet.
Turn over the trampoline frame so that the bouncing
surface is against the ground.
There are plastic end caps on the tubes for
assembling the feet.
Remove these caps and discard them.
Screw the feet onto the tubes and put the trampoline
back in position.
Step 5
The handlebar is assembled onto the top handlebar
bar with the M8x40 bolt and arc washer.
Use an allen key to firmly secure the elements.
EN
ASSEMBLY
16
5.
6.
7.