Whirlpool WHR 18 TD Kurzanleitung

Quick guide
THANK YOU FOR BUYING A WHIRLPOOL PRODUCT
In order to receive a more complete assistance, please
register your product on
FIRST TIME USE
Wait at least two hours, after the installation, before connecting
the appliance to the power supply. Connect the appliance to the
power supply it starts the operation automatically. The ideal storage
temperatures for the food are preset in the factory.
CONTROL PANEL
SETTING THE TEMPERATURES
Press the Refrigerator Button
refrigerator compartment.
Recommended setting for Refrigerator compartment is MED
Press the Freezer Button to set a different temperature in the freezer
compartment.
Recommended setting for Freezer compartment is MED
LEAST COLD
MEDIUM
COOLEST TEMP
FAST FREEZING
Led off Led on
* Available only on certain models
www . whirlpool . eu/ register
1 2 3 4
to set a different temperature in the
Before using the appliance carefully read the Safety
Instruction.
After turning the appliance on, you must wait for 4-6 hours for the
correct storage temperature to be reached for a normally filled
appliance. Position the antibacterial anti-odour filter in the fan as
demonstrated in the filter packaging (if available). If the audible signal
sounds, it means that the temperature alarm has intervened: press the
button to switch off the acoustic alarms.
5 6
ON/STAND-BY
Press the Refrigerator Temperature
turn the appliance on stand-by.
When in Stand-by mode the light in the refrigerator compartment does
not turn on. Press the button again briefly to reactivate the appliance.
To avoid an increase of food waste, refer to recommended setting and
Storage Time in User manual online.
FAST FREEZE
In order to preserve at best, please use the Fast Freeze function before
putting a large quantity of food in the freezer cavity.
Press the button (6) until all the three leds are on in order to set the
function.
The function turns off automatically after 26 hours, or manually by
selecting different freezer temperature.
Note: avoid a direct contact between the fresh food and the food that is
already frozen. To optimise the freezing speed, drawers can be removed
and the food can be placed directly on the bottom of the compartment.
1.
Refrigerator Temperature / Stand By
2.
Temperature Indicator setting
3.
Refrigerator Indicator
4. Alarm Indicator
5. Freezer Indicator
6.
Freezer Temperature / Stop Alarm
button for 3 seconds to
EN