Werbung
Verfügbare Sprachen
Verfügbare Sprachen
PLASMA E-TECHNOLOGY FILTER
Malfunction
Improper repairs are dangerous, you have the risk of an electric shock! If the device is defective,
unplug it and contact the customer service.
Malfunction
The device does not work.
Red light flashing.
Blue light flashing during the
operating mode.
Blue light flashing.
When there is no solution after trying the tricks above, please contact the customer service.
Environment-friendly waste processing
Possible cause
The plug is not inserted in the
socket.
Power cut.
Blown fuse.
Overloading of filter.
The cleaning time of the filter
is reached.
The maximum lifetime of the
filter has reached.
The Plasma E-technology Filter meets the requirements of the European
Waste Electrical and Electronic Equipment (WEEE) Directive. This
directive contains the provisions applicable in the EU regarding take-
back and disposal of waste equipment.
Please also ensure environmentally friendly disposal of the packaging
material.
Solution
Put the plug into the wall
socket
Check whether other kitchen
equipment is working.
Check at your central
electricity point whether the
device's fuse is intact.
Remove power from the filter
temporarily, thereafter the
electronics will reset itself.
Turn the hood off. You can
re-enable the hood after
1-2 minutes.
Purchase a new filter.
EN 11
Werbung
