Werbung
Verfügbare Sprachen
Verfügbare Sprachen
PLASMA E-TECHNOLOGY FILTER
Introduction
Thank you for purchasing a Plasma E-technology Filter.
The Plasma Filter is intended to filter airborne odor particles, fine dust particles, pollen and
micro-organisms (house dust mites, bacteria, viruses and fungi) from the air. If the source of the
smell is still active, the Plasma Filter cannot remove the smell completely (for example if you
are still cooking). Harmful gases (carbon monoxide etc.) cannot be removed by the Plasma
Filter. The Plasma E-technology Filter features OACS (Ozone Active Control System) and IACS
(Ionization Active Control System) to meet the latest, strictest safety standards.
The Plasma Filter makes use of ozone while using the extractor hood for air cleaning.
The amount depends on the time you use the filter. When the filter is placed in a well-
ventilated room, the amount will be within the set safety standard. This process can
cause a slight ionization smell.
Please read the separate safety instructions carefully before
using the filter.
Read this manual before using the filter and keep it in a safe place for future use.
You can find the most recent version of the instructions for use on our website.
EN 4
Werbung
