Fixed Code Transponder Reading/Writing; Megamos ® Cloning Function Activation - Keyline 884 Decryptor Mini Bedienungsanleitungen

At the end of the Calculation phase, the
system will ask for the Keyline electronic
head to be inserted again in the 884 De-
®
cryptor Mini for the final cloning phase:
The transponder writing phase will start next:
Now the Keyline key with the Keyline
electronic head is ready to be used.
2.4.3

Fixed code transponder reading/writing

The main screen is displayed a few sec-
onds after the start and will show the fol-
lowing message:
Insert the key to be "cloned" in the anten-
na and the Software will launch the tran-
sponder recognition phase:
Insert the key blank as requested on screen
and wait the necessary cloning time.
At the end of the process, the Keyline key
with the Keyline electronic head is ready
to be used.
®
2.4.4 Megamos cloning function acti-
vation
The activation procedure must be
launched once the App or Software have
been installed on an Android smartphone
or tablet or PC with Windows (7 and sub-
sequent versions), after inserting the
Keyline electronic head in the antenna, as
requested.
Wait a few seconds for the registration
phase to be completed, then remove the
Keyline electronic head.
Confirm the registration was made cor-
rectly.
Note: the device must be connected to the PC or
smartphone or tablet.
Keyline S.p.A.
®
884 Decryptor Mini Man. cod. B410091FG
USE
Copyright by Keyline - Italy 7