Use; User Menu Description; Philips Crypto 2 And Megamos Crypto Transponder Reading/Writing - Keyline 884 Decryptor Mini Bedienungsanleitungen

2.4.0 Use

Start the App or Software from your Android
smartphone or tablet or PC with Windows (7
and subsequent versions); after a few sec-
onds, the start page will be displayed. Press
ENTER to go to the screen where the e-mail
address and password are to be entered:
Note: when accessing the programme for the first
time, it is important to input one's personal
data and the data of one's Keyline devices
in the "My profile" menu (paragraph 2.4.1).

2.4.1 User menu description

From the main screen it is possible to ac-
cess an area for the management of some
utilities or the consultation of information
on one's own device:
• My profile: this section contains the user's
registration data and makes it possible for
the user to amend their data and those of
their products.
• Settings: in this section it is possible to
change the language used and install
any system updates
(*)
• Diagnostics: this section identifies the
device recognised by the system, show-
ing its update status.
• Logout: to exit the system.
®
2.4.2 Philips Crypto 2 and Megamos
Crypto transponder reading/writing
The main screen is displayed a few sec-
onds after the start and will show the fol-
lowing message:
Read the transponder by inserting the key to be
"cloned" in the 884 Decryptor Mini
The App or Software will launch the key
recognition procedure:
Once reading is concluded, the system
will ask to insert the key blank:
(*) Warning: this menu item is present only in the
PC Software.
Keyline S.p.A.
Warning: Before connecting the 884 Decryptor Mini
device has USB-OTG capability by opening the Keyline Cloning Tool App
in Diagnostic mode from the main menu in the top left part of the screen.
.
®
®
antenna.
®
884 Decryptor Mini Man. cod. B410091FG
USE
®
, check that your
Copyright by Keyline - Italy 5