SAFE REMOVAL OF BUILT-IN BATTERY
Creative Sensemore Air
(Model No: EF1020)
[EN]
Safe Removal of Built-In Battery
This product contains an integrated battery which should ONLY be removed by service centers or
recycling facilities with reference to the instructions herein. Creative and its affiliates will not be
liable for any damages resulting from attempting to remove and/or tampering with the battery or
any part of the product by an end user.
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION:
Make sure the product is disconnected from the charging cable before removing the battery.
Cover one of the battery terminals with insulation tape to prevent short circuit - not applicable to
battery with connector.
1. Pull out top cover of earbud that is being held by glue.
2. Remove pcb from bottom cover of earbud.
3. Remove battery from earbud.
4. Flip open top cover of charging case
5. Separate middle plastic case from bottom cover of charging case
6. Remove the four screws
7. Remove pcb from bottom cover of charging case
8. Remove battery from charging case
Creative Sensemore Air (EF1020) Safe Removal of Built-In Battery
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE PRODUCT(S) COVERS (OR
BACKS).