Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6.2 Cleaning
o Clean the device regularly.
o Clean the cooking surface, control panel and housing with a soft damp cloth and
with a mild, and not an abrasive cleaning agent.
o Always protect the rear vents of the device against dirt and dust or clean them
(using a brush or air blower).
o Never use cleaners containing petrol or solvents so as not to damage the surface of
the device.
o Use only soft cloth and never use abrasive or aggressive cleaners which may
scratch the surface.
o After cleaning use a soft, dry cloth to dry off and polish the surfaces of the device.
6.3 Safety instructions for maintenance
o Check the mains connection cable for damage from time to time. Never operate the
device when the cable is damaged. A damaged cable must immediately be replaced
by customer service or a qualified electrician to avoid dangers.
o In case of damage or malfunction, please contact your stockist or our customer
service centre. Pay attention to the troubleshooting tips in pt. 7.
o Only a qualified technician and using original spare parts and accessories should
carry out repairs and maintenance of the device. Do not attempt to repair the
device yourself.
7. Possible Malfunctions
Error
message
• There is no cookware on
E0
• The device is too hot
E1
• Damaged elements (e.g.
Cause
the hob, or the cookware
is of the wrong type.
(e.g. due to a blocked
ventilation duct)
transistor)
Solution
• Place appropriate cookware on the
hob.
• Clean the ventilation duct. Leave the
device to cool for several minutes; it
will then be ready for further use.
If the error message remains, contact
a sales agent.
• Contact a sales agent.
- 31 -
Werbung
