Levenhuk LC900 Bedienungsanleitung Seite 3

Levenhuk LC900/LC1500 Hunting Laser Rangefinder
EN
Please carefully read the safety instructions and the user manual before using this product, otherwise it may result in
hazardous laser radiation and electric shock. Use the device only as specified in the user manual. Keep away from children.
LCD Display
2
5
6
9
10
Hgt
11
Hor
12
Getting started
•
Open the battery compartment cover and insert the battery according to the correct polarity marks. Close the cover.
•
Press the Power/measure button (1) to turn the device on or off. The rangefinder enters the distance measurement mode by default
(Fig. 1).
•
Rotate the focusing ring (5) until the view is in focus.
•
Press and hold the Mode button (2) to change the measurement units. Quickly press this button to choose between the modes.
There are 5 modes available: 1) distance measurement mode, 2) slope mode, 3) horizontal distance mode, 4) height distance mode,
and 5) speed mode.
Usage
Distance measurement mode
In the distance measurement mode, aim the device at your intended target and press the Power/measure button (1). The straight line
distance to the target will be displayed (Fig. 2).
Press and hold the Power/measure button (1) for continuous measurement.
!
The maximum measurement range is affected by weather conditions as well as the dimensions and reflectivity of the target
object.
1. Low battery indicator
2. Angle icon
1
3. Current angle value
3
4. Center of the target (bullseye)
5. Flagpole lock mode
6. Distance measurement mode icon
4
7. Straight line distance
8. Units of measurement
7
9. Speed icon
8
10. Height measurement icon
11. Trajectory adjustment icon
12. Horizontal distance icon
13
13. Measurement value
Figure 1
Figure 2
3