Herunterladen Diese Seite drucken
Vorschau ausblenden Andere Handbücher für Quantum:

Werbung

Schritt 08/Step 08
(Abb. 8/Fig. 8)
Connect the other end of the silicone tube to
the muffler. Attach the skimmer cup.
Verbinden Sie das andere Ende des Silikon-
schlauchs mit dem Schalldämpfer. Befestigen
Sie den Topf.
Nyos
Aquatics GmbH
®
Siemensstr. 26
70825 Korntal-Muenchingen, Germany
www.nyos.info, support@nyos.info
Quantum
®
video instructions and tips
Videoanleitung und Tipps
Schritt 01/Step 01
(Abb. 1/Fig. 1)
DE/EN
Quick Start
Disassemble the skimmer body by removing the four base
screws then set them aside.
Zerlegen Sie das Abschäumergehäuse, indem Sie die vier
Schrauben entfernen und diese dann beiseite legen.

Werbung

loading

Inhaltszusammenfassung für Nyos Quantum

  • Seite 1 DE/EN Schritt 08/Step 08 Quantum Quick Start ® video instructions and tips Videoanleitung und Tipps Connect the other end of the silicone tube to the muffler. Attach the skimmer cup. Verbinden Sie das andere Ende des Silikon- schlauchs mit dem Schalldämpfer. Befestigen Sie den Topf.
  • Seite 2 Schritt 02/Step 02 Schritt 05/Step 05 Remove two screws from the small side of the Put the base plate on the top of the pump pump mount as shown above and set the loose and screw the grey collar over the pump out. arm aside.