Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation
WARNING!
If a stationary appliance is not fitted with a supply cord and a plug, or with other means for
disconnection from the supply mains having a contact separation in all poles that provide full
disconnection under overvoltage category III conditions, the means for disconnection must be
incorporated in the fixed wiring in accordance with the wiring rules. This is also applicable for
appliances with a supply cord and plug when the plug is not accessible after installing the
appliance. Using an omnipolar switch with a contact separation of at least 3 mm fitted in the fixed
wiring will fulfil this requirement.
Prior to connecting the drawer, ensure that all cables in your home's electrical system are
of sufficient diameter. Your system should be protected by a 10-amp fuse.
10
Werbung
