elta TK-2200.2 Bedienungsanleitung Seite 15

NOTE: Only with above operation, the kettle can have keep warm
function, and it will lost function when the kettle body separate with the
base, reset is needed.
(3) Press " " shortly, with the buzzer sends out "di" sound, the kettle
start boiling function. Press "
display, it means kettle stopped boiling when water reach 40℃;
Press " " button two times,it shows 50℃ on the display, it means
kettle stopped boiling when water reach 50℃; Press "
times,it shows 60℃ on the display, it means kettle stopped boiling when
water reach 60℃; Press "
display, it means kettle stopped boiling when water reach 70℃;
Press " " button five times, it shows 80℃ on the display, it means
kettle stopped boiling when water reach 80℃; Press "
times,it shows 90℃ on the display,it means kettle stopped boiling when
water reach 90℃; (Same way to press the button "
selection).
4. After the use finished, please put plug off the power
socket.
How to care for your kettle
- Wipe the exterior of the kettle with a soft, damp cloth or sponge. Remove
stubborn spots with a cloth moistened with mild liquid detergent. Do not
use abrasive scouring pads or powers.
- Never immerse the kettle in water or other liquids.
- From time to time, depended on the nature of your water supply, a boiled
scale deposit is naturally formed and can be found mostly adhered to the
heating element, thus reducing the heating efficiency.
- The amount of boiled scale deposited (and subsequently the need to
clean or rescale) largely depends on the water hardness in your area the
frequency with which the kettle is used.
- Boiled scale is not harmful to your health. But if poured into your
beverage, it can give a powdery taste to your drink. Therefore, the kettle
should be descaled periodically as indicated below.
" button one time, it shows 40℃ on the
" button four times, it shows 70℃ on the
" button three
" button six
" for temperature