elta TK-2200.2 Bedienungsanleitung Seite 13

(4) Do not fill with less than 0.5 liters of water (to "min" indication) to
prevent the kettle running dry while operating．
(5) Do not fill with less than 1.7 liters of water (to "max" indication).
(6) An automatic safety cut-out has been fitted for protection against
overheating, it will operate if the kettle is switched on when containing
insufficient water. Always ensure the water inside the kettle covers the
minimum mark on the water level indicator gauge．If the automatic safety
cut-out has operated, switch the kettle off，disconnect from the power
outlet and allow the kettle to cool down for 5 to 10 minutes．The refill with
and switch on，the kettle will work as normal．
(7) After boiling, the kettle switches off automatically.
Disconnect the kettle from the mains electricity supply.
Do not open the lid when pouring.
If the kettle is overfilled ,boiling water may be ejected.
The kettle is only to be used with the stand provided.
(8) This appliance is intended to be used in household and similar
applications such as:
- staff kitchen areas in shops, offices and other working environments;
- farm houses;
- by clients in hotels, motels and other residential type environments;
- bed and breakfast type environments.
2. Basic operation
(1) Put the base on the dry, smooth and horizontal plane, insert the plug
to the socket. When the kettle is inserted into the base, the power puts
through automatically．
(2) Press the " " key shortly, with the sound "Di.", it starts running. " "
key under twinkle, it means the water start boiling.
(3) After the water boils, indicator turns off and the buzzer sends out a
"di-" sound at the same time.
3. Self-defining operation:
(1) Press the " " key shortly, with the sound "Di", it starts running. Then
press " "key, with the sound "Di" from buzzer，start dechlorination,
after water boiling, the buzzer sends out "Di" "Di" sound. It will stop
heating automatically after boiling 3 minutes and heard sounds like "Di"
"Di", dechlorination finished.