Heco METAS SUB 30A Bedienungsanleitung Seite 8

GB
Dear Customer,
Congratulations on your fine new loudspeakers and thank you very much for
choosing HECO! You have made an excellent choice. The high-quality speakers
produced by HECO are renowned all over the world.
Please study the instructions and information below carefully before using your new
loudspeakers.
THE HECO METAS SUB 30A ACTIVE SUBWOOFER
This subwoofer has been adapted to provide the best visual and acoustic match to
the HECO Metas range of loudspeakers. However, it goes without saying that it may
be combined with other loudspeakers.
When connecting your loudspeaker, please make sure that everything has been
switched off. Furthermore, make sure that all loudspeaker cables are connected to
the proper poles, i.e. the positive pole for the output is connected to the positive pole
for the input and the negative pole with the negative pole. Please also refer to your
receiver's/amplifier's and loudspeakers' instructions.
POSITIONING
The frequency range reproduced by the subwoofer cannot be pinpointed by the
human ear. That's why positioning generally doesn't present any problems. However,
it is preferable to place the speaker close to the front loudspeaker in front of the
listening position. You should also make sure that the distance from the sides to items
and walls is at least 30 centimetres and at least 20 centimetres from the rear as
otherwise bass reproduction may be impaired.
THE SUBWOOFERS' OPERATING ELEMENTS (FIG. 1)
Mains connection (1), mains-voltage switch (2)
The subwoofer is equipped with an integrated amplifier and needs to be connected
to a mains outlet by means of the supplied mains cable. The voltage selector has
been set at the factory to 230 V for operation in Europe.
8