MANOSTAT Compulab 3 Bedienungsanleitung Seite 19

SELECT THE PUMP NUMBER BEFORE LOADING THE PROGRAM
PERFORM PRIME AND
CALIBRATE PROCEDURES
BEFORE RUNNING
THE PROGRAM
RUNNING THE PROGRAM
PRIME PRIME ENTER CONTINUES #1 ENTER CONTINUES #1
PRIME PRIME
PUMPING AT ###.#mL/MIN PUMPING AT ###.#mL/MIN
PRESS
CANCEL/STOP
OR STOP ALL
PROG:## PAUSED PROG:## PAUSED AMT PUMPED ###.#mL AMT PUMPED ###.#mL
RESUME RESUME START OVER START OVER
Figure 13. Run a Pump Program
15
PROGRAM ## PROGRAM ## LINKED:NONE LINKED:NONE
PRIME PRIME CALIBRATE CALIBRATE
PUMP
PURGE PURGE
CALIBRATE CALIBRATE ENTER CONTINUES #1 ENTER CONTINUES #1
CAL VOLUME: CAL VOLUME: 10.0mL 10.0mL
CAL DISPENSE ####.#mL CAL DISPENSE ####.#mL
[¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ [¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
CALIBRATE CALIBRATE ENTER CONTINUES #1 ENTER CONTINUES #1
MEASURED VOL:####.# MEASURED VOL:####.#
CANCEL STOPS CANCEL STOPS
PUMP
#1 #1
END END
RATE:####.#mL/MIN RATE:####.#mL/MIN
FASTER FASTER
PUMP
#1 #1
PROGRAM PROGRAM RUN RUN
TO PROGRAM MENU
ON MAIN MENU
FLOWCHART
PUMP
RUN CAL RUN CAL
PUMP
CANCEL STOPS #1 CANCEL STOPS #1
] ] ####.#mL ####.#mL
PUMP
CANCEL CANCEL
PUMP
#1 #1
####.#mL ####.#mL
PRESS
SPEED/VOLUME
TO CHANGE
PUMP SPEED
PUMP
ENTER CONTINUES #1 ENTER CONTINUES #1
SLOWER SLOWER