Herunterladen Diese Seite drucken

Hama 00118611 Bedienungsanleitung Seite 7

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Operating Instructions
©
Thank you for choosing a Hama product.
Take your time and read the following instruc-
tions and information completely. Please keep
these instructions in a safe place for future re-
ference. If you sell the device, please pass these
operating instructions on to the new owner.
1. Explanation of warning symbols and
notes
|
ው This symbol is used to indicate safety
instructions or to draw your attention to
specific hazards and risks.
ው This symbol is used to indicate additio-
nal information or important notes.
2. Package contents:
- ΤΝ wall bracket
- Installation kit (see contents, Fig. 1)
- These operating instructions
ው Please check that the installation kit is
complete before installing the bracket
and ensure that none of the parts are
faulty or damaged.
w
. Safety instructions
For proper installation, please have this bra-
cket fitted by a qualified specialist.
If the wall on which the television is to be
mounted is made of other types of material
than those specified, you should buy appro-
priate installation material from a specialised
dealer.
Also observe the safety clearance around the
TV unit (depends on the model).
B
The bracket may not be mounted above loca-
tions where persons might linger.
Once you have mounted the bracket and the
flat panel display, check that they are suffici-
ently secure and safe to use.
You should repeat this check at regular inter-
vals (at least every three months).
In case of damage, remove the TV and do not
continue to use the holder.
Ensure that no electrical cables and connec-
tions are crushed or damaged during instal-
lation or adjusting.
Do not place loads on the bracket that are
heavier than the load-bearing capacity spe-
cified and do not exceed the specified maxi-
mum screen size.
Ensure that the bracket is loaded symme-
trically. During adjustment, ensure that the
bracket is loaded symmetrically and that the
maximum weight is not exceeded.
. Intended use and specifications
The bracket is used for wall mounting flat
panel displays for non-commercial, private
household use.
The bracket is only intended for use within
buildings.
Use the bracket only for the intended pur-
pose.
©
1861iman
cs de el en es fi ከ hu it nl pl pt ro ru sk sv trindd
7
06.06.12
09:4

Werbung

loading