WOLFF 067323 Original Bedienungsanleitung Seite 10

Use this machine only
as instructed in this operating manual
with the machine in perfect working order.
WOLFF cannot be held responsible for any damage or
loss caused by incorrect use Correct use also includes
to take care of all directions from the operating
manual and
the execution of maintenance and service.
03/2012
3.1 Introduction
This operating manual should be used to get the most benefit
from your grooving machine. Following these instructions will
both extend the life of your machine and reduce repair costs.
Please ensure any user of the machine is fully familiar with the
instructions for use before allowing work to start.
3.2 Danger while working with the machine
The grooving machine is designed to the highest technical stan-
dards. Incorrect use can be dangerous!
Disturbances that could impair safety, have to be eliminated at
once.
3.3 Restriction of use
The grooving machine parquet is intented exclusively for milling
joints in newly polished wooden floors.
3.4 Genuine spare parts
Spare parts and accessories are manufactured uniquely for the
grooving machine. It must be emphasized that parts obtained
from unauthorized sources must not be used.
WOLFF cannot be held responsible for the performance of or
any damage arising from the use of machines in which genuine
spare parts have not been used. This is particularly
important with replacement blades.
Parkettnutfräse, #067323
10