Mitchell uStream One Benutzerhandbuch Seite 19

Adjusting the volume with remote control handset
Point the remote control at Speaker 1 (Left) and repeatedly press the Volume + button on the remote control
handset. (Do not simple press and hold)
An audible beep will be heard when max volume is reached.
You can now use your device to adjust the volume up and down.
Connecting Other Devices
You may wish to connect other devices to the uStream One such as a TV, an external music player or a
turntable.
There are 3 external auxiliary connections that can be used, but remember, they must be connected to
'Speaker 1' in order to hear stereo sound from both speakers simultaneously.
The possible connections are:
1. RCA left and right
2. 3.5mm stereo line in jack
3. Optical TOSLINK
Connection of Analog RCA Audio Cables
Pay attention to the plug colours and the left and right channels when connecting RCA audio cables.
Ensure a good connection by making sure to insert plugs completely. Failure to insert fully can cause noise or
malfunctions.
Correct Connection of Optical TOSLINK Cables
The speakers contain a high quality optical input which works with most televisions via a
standard TOSLINK cable. Make sure your television is set to output digital audio in PCM
format. Refer to the user manual of your television for details. Be careful to match the
shapes correctly on the optical cables.
© Mitchell Acoustics Limited UK 2021 uStream One IB Ver 2.0 Rev 1
19 of 116