Mitchell uStream One Benutzerhandbuch Seite 15

Remote Control Handset
1. Power On from standby mode
2. Previous Track
3. Volume Down
4. Mode Changer
5. Volume Up
6. Next Track
7. Play/Pause. Press and hold for 5 seconds to discounnect BT connection.
Remote Control Handset Battery
The remote control handset is supplied with
a CR-2032 battery. However, it has been
deliberately fitted in reverse to preserve the
battery life before first use.
Remove the battery tray as indicated and
remove the battery and replace with
numbers facing down. Then replace the
battery tray as indicated.
© Mitchell Acoustics Limited UK 2021 uStream One IB Ver 2.0 Rev 1
15 of 116