Cleaning And Maintenance - Kidwell COLMER Benutzerhandbuch

OPERATING THE BRAKE (Fig. 7)
• Follow the instructions in the figure.
NOTE: When putting the child in or out of the stroller, the brake (H) must be engaged
(in the ON position).
BACKREST ADJUSTMENT (Fig. 8)
• To set a backrest inclination angle (D), pull the bottom part of the lever and move the
backrest to one of the three setting steps.
SAFETY HARNESS (Fig. 9)
1. Insert the top harness webbing hooks (L) into the latch plates.
2. Lock the safety harness latch plates with the centre buckle.
3. Make sure that the harness is engaged by the centre buckle.
INSTALLING THE FOOTMUFF (Fig. 10)
1. Place the bottom end of the footmuff (M) onto the footrest (F) and secure the top end
of the footmuff over the guard rail (C) of the stroller.
2. Pass the top retaining loops under the frame tubes and secure with the hook and
loop fasteners.
FOLDING THE STROLLER (Fig. 11-13)
1. Fold away the canopy (A) and set the backrest (D) all the way down.
2. Press both frame open position safety lock buttons (K) at the same time (Fig. 12) and
fold the frame so that the folded position lock (G) engages.
3. Do the seat retaining strap (Fig. 13).
With the stroller folded and secured, you can stow it upright.

CLEANING AND MAINTENANCE

• This product requires regular maintenance.
• It needs to be cleaned and maintained by an adult.
• Clean the stroller with a damp cloth, using water with soap.
• To avoid friction between moving parts, which may cause damage to the stroller,
make sure that the parts are clean and there is no dirt, sand or dust in between.
• Regularly make sure that no part of the stroller is damaged, torn or missing. If any
part appears to be damaged, stop using the product.
• Make sure that the fabric and seams are in good shape whenever you wash the
stroller.
• If the product is exposed to direct sunlight, high temperatures or other weather
14