APEXEL 60X Benutzerhandbuch Seite 7

Assembly
1. Attaching the Phone Holder Gently affix the phone holder to your device, ensuring that
the circular hole in the center of the phone holder's metal plate aligns with the primary
camera of your phone (1). Next, slide the phone holder's 17 mm threaded plate to center
it over the primary camera (2).
2. Attach the zoom lens to the phone
Screw the lens clockwise into the 17 mm screw hole of the clip camera, (4) Make sure the
lens is aimed at your phone's main which you can verify by looking at your screen.
Note: If you find dark corners on the shooting screen, please use the following two
adjustment methods: 1. Slightly move and adjust the lens or clip to ensure that the Apexel
lens is aligned with the primary camera 2. Zoom in the shooting magnifications.
3. Connect your phone to the tripod
Screw the tripod into the 1/4-inch screw interface of the fixed ring until the locking lens is
not loose (5)
4. How to use the tripod
6. Extend the tripod legs and fine-tune the height to your preference.
7. Secure the legs in place.
8. Release the leg locks.
9. Utilize the horizontal adjustment knob to rotate the cradle head horizontally by
360°.
10. Employ the vertical adjustment knob to rotate the quick-loading plate.
11. Use the tilt adjustment handle to rotate the cradle head by 180° in the tilt
direction.
7