Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Declaration of Conformity
Manufacturer:
Authorized representative:
The declaring manufacturer states, that the machines listed below and marked accordingly do comply with the demands of directive
(2006/42/EG) on machinery and the directive (2014/35/EU) of the European Parliament.
The declaration is valid for complete designs of Side Channel Blowers and Side Channel Vacuum Pumps of our series:
harmonized German standards applied:
DIN EN ISO 12100:2011
DIN EN 1012-1:2011
DIN EN 1012-2:2011
DIN EN ISO 13857:2020
DIN EN ISO 13732-1:2008
DIN EN 60204-1:2019
_____________________________________________
Schweinfurt, 13.10.2021, Martin Kedziora, Executive Director
AIRTECH Europe GmbH, 97424 Schweinfurt, Germany
AIRTECH Europe GmbH
Carl-Zeiss-Straße 25
97424 Schweinfurt
Deutschland / Germany
Nennstiel Rene
Carl-Zeiss-Straße 25
97424 Schweinfurt
Deutschland / Germany
-ASC....
-VSC....
-ASP....
-ASV....
Safety of machinery - General principles for design - Risk assessment and risk reduction
Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors
Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps
Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs
Ergonomics of the thermal environment - Methods for the assessment of human responses to contact
with surfaces - Part 1: Hot surfaces
Safety of machinery - Electrical equipment of machines - Part 1: General requirements
34
Werbung
