Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Fast preheat
You can shorten the preheating time by using the Fast Preheat function. Select a function, and tap
the symbol for Fast Preheat
Preheat is not available for the selected function, a beep will be heard. Fast Preheat is not available
with the "Defrost" and "Dough process" functions.
Changes while cooking
When the appliance is switched on, you can change the operating mode and temperature using the
oven function control or the Smart Slider. If no further action is taken after the change for 6
seconds, the oven will accept the change.
If you want to change the cooking time while cooking, tap on
Slider or the "+/-" symbol. If no further action is taken after the change for 6 seconds, the oven will
accept the change. You cannot make any changes during a cooking process with a specified end
time.
If you want to cancel the cooking process, tap
Notes
Changing the operating modes/temperature/remaining cooking time can have a number of negative
effects on the cooking result. We recommend that you avoid doing this – unless you are an
experienced cook.
Caution!
After switching on the appliance, it will become very hot, especially inside. Never touch the inner
surfaces of the appliance or the heating elements. Use oven gloves to remove accessories or
ovenware from the cooking chamber and let the appliance cool down. Keep children at a safe
distance to avoid burns.
Timer
Tap
to use the timer function. When the set time is up, the oven will signal this with a beep. The
first time you tap the
minutes. Tap the
You can set the timer before and during cooking, but if you select the function and temperature, the
timer will not be available.
. The symbol for Fast Preheat will light up on the display. If Fast
symbol, the hours are set. Then tap the
symbol once more to end the setting process.
and change it using the Smart
.
symbol again to set the
11
Werbung
