Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Replacing the lamp in the cooking chamber
If the lamp in the cooking chamber goes out, it must be replaced. Heat-resistant halogen lamps with
25 watts and 230 V are available from specialist dealers.
Hold the halogen lamp with a dry cloth. This will increase the service life of the lamp.
WARNING
Danger of electric shock!
When replacing the lamp, the contacts of the lamp socket are live. Before replacing the lamp,
disconnect the power plug or turn off the circuit breaker in the fuse box.
Risk of burns!
The appliance becomes very hot. Never touch the inner surfaces of the appliance or the heating
elements. Always let the appliance cool down. Always keep children at a safe distance.
1.
Place a towel in the cold cooking chamber to avoid damage.
2.
Corner lamp: Turn the glass cover counter-clockwise to remove it.
Side lamp: Pull out the guide rails and lever the glass cover slightly using a tool with a flat
head.
3.
Pull out the lamp – do not turn it.
4.
Put the glass cover back in place.
5.
Remove the towel and turn on the circuit breaker to check if the lamp is lit.
6.
If the side lamp works after replacement, reinsert the guide rails.
Corner lamp
EN-25
Werbung
