WMF MASTER TOASTER Bedienungsanleitung Seite 11

tions. The LED screen (3) will show the last
browning level used (level 5 initially).
3| Insert the bread slices into the bread slots.
The slices should not be thicker than 2.6 cm
so that they do not jam. Place small slices
next to one another in an upright position
in the bread slot so that it is easier to take
them out after toasting.
4| Select the desired functions. Selectable
functions are dimmed, then fully lit when
selected. Some are combinable. It is the
case of Defrost (11) and Bagel (10), or Bagel
and Reheat (8). With the help of the rotary
knob (5), subsequently choose the brown-
ing level. Press the knob to confirm your
choice.
5| The lift will automatically center the slices in
the heating chamber (2). The toasting pro-
cess then begins. It can be followed thanks
to the countdown on the LED screen (3).
6| Once the toasting time has finished, the
toasting process ends automatically and the
finished toast is automatically raised from
the bread slot for removal.
6| NOTES ON THE BROWNING
LEVEL
If the toast is too light in colour, select a higher
browning level. If it is too dark, set the control
knob to a lower level. The figures 1 to 12 serve
only for orientation purposes. The higher the
setting, the darker the browning level.
The toasting result may vary at the same setting
depending on the type, size, moisture and thick-
ness of the bread slices. Therefore, select a lower
setting when toasting less moist bread, smaller
slices or only one slice.
Acrylamide is generated during excessive
browning. Excessive browning of the toast
should therefore be avoided.
6.1| INTERRUPTING THE TOASTING
PROCESS
Press the rotary knob (5) to interrupt the toast-
ing process.
6.2| BAGEL FUNCTION/SINGLE-SIDED
TOASTING
Ideal for baguettes, rolls and bagels. For sin-
gle-sided toasting of a baguette, for exam-
ple, cut the baguette lengthwise. Place it in the
bread slot so that the cut side is facing the front
and press the bagel button (10). The slice of
bread will only be toasted on its front side.
6.3| WARMING UP / SECONDARY
TOASTING
Press this function (8) to warm up cooled off
toast again to make it crispy (regardless of the
set degree of browning), or to slightly toast a
slice of light bread. It is by default set to 30s.
6.4| DEFROST
Press this function (11) to extend the toasting
cycle to toast frozen bread.
6.5| CHECK UP FUNCTION
This function (9) can be pressed at any point of
the toasting process. It will pause the process
and the motorized lift will gently lift the toast
for you to control the browning progress. You
can then:
Click again on the symbol to bring the
€
toast back in the heating chamber (2) and
resume the toasting process.
Click on the rotary knob/stop button (5) to
€
interrupt the toasting process.
Turn the rotary knob (5) to add or remove
€
some time to the toasting process and
press again the check up symbol to resume
the toasting process.
20
6.6| SOUND SETTINGS
Press the setting button (12) on the touch
screen. The level of sound volume set will
appear on the LED display (by default L3). Turn
the rotary knob (5) to set the volume higher or
lower and press the rotary knob to confirm.
6.7| CUSTOMIZATION OF FUNCTIONS
The times of both the warming/retoasting (8)
and the defrost (11) functions are customizable.
In order to change it, press the setting but-
ton (12) on the touch screen, then the function
you desire to change. The LED display (3) will
show the default value. Change it by turning
the rotary knob (5) and press the rotary knob to
confirm.
8| TECHNICAL SPECIFICATIONS
Nominal voltage: 220 -240 V~ 50 – 60 Hz
Power consumption: 820-980 W
Protection class: I
Environment
Environment protection first!
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a local civic waste collection point.
6.8| CRUMB TRAY
Crumbs produced during toasting are collected
in the crumb tray (6). To empty, briefly press
against the crumb tray. You will then be able to
pull it out of the device.
7| CLEANING AND CARE
Before cleaning, disconnect the appliance from
the mains and allow the appliance to cool
down. Use a hard brush to remove crumbs stick-
ing to the grids and the heater. Do not tilt the
appliance while you do this, or crumbs will
spill from the crumb tray into the inside of the
toaster. Then pull out the crumb tray, clean it
and reinsert.
Never immerse the toaster in water. Wipe the
outside of the appliance only with a damp cloth
and some washing-up liquid. Do not use harsh
or abrasive cleaning agents. Do not clean with
oven/grill spray. Do not use a steam cleaner.
The appliance complies with European
directives 2014/35/EU, 2014/30/EU and
2009/125/EU
21