Werbung
EN
Ground
THE STRUCTURE MUST BE FASTENED TO THE GROUND PERMANENTLY. OTHERWISE, IT WILL BE CAUGHT BY THE WIND AND IT MAY CAUSE
INJURIES!
GROUND TYPE:
Concrete blocks
The blocks should be dug completely into the ground and laid on a cement
mortar (connected with each other) to form a dense solid with the length and
width provided in the drawing. Fill the joints with the cement mortar.
Location
Do not assemble the greenhouse on open spaces, on slopes and in locations particularly exposed to wind blows – this will extend the service life
of the hotbed significantly and make the use of BioGreen polycarbonate greenhouse satisfactory for a longer period of time.
The correct mounting of the greenhouse to the ground will protect the product against being caught by the wind.
BioGreen is not held responsible for:
•
the incorrect use of the greenhouse and destruction as a result of extreme weather conditions (hailstorm, storm winds, snow). The ground must
be even and levelled.
•
damage due to the greenhouse being caught by the wind (it applies to product damage and damage caused by the greenhouse).
The user is responsible for the reliable assembly of the product and its secure fastening to the ground.
standard concrete
block 24x12x38
weight approx. 22-25kg
230cm
Pay attention so
that the greenhouse
mounting is not
228cm
located at the blocks
connection.
Concrete foundation
min. 20cm
Foundation
depth 20cm
230cm
224cm
Werbung
