SwitchBot Curtain 3 U Rail Benutzerhandbuch Seite 6

Installation
Step 1: Add your SwitchBot Curtain 3 U Rail to our app
Open our app and sign into your account. Tap "+" at the top right-hand corner of the
home page, find the Curtain icon, and select. Then follow the instructions to add your
SwitchBot Curtain 3 U rail.
Step 2: Install SwitchBot Curtain 3 Rod onto your curtain track.
Find the best matching Hook Wheel
When you receive your device, a set of Hook Wheels will already be installed on your Hook
Pair. There are also several different-sized sets of Hook Wheels inside the packaging to
enable you to find a set that suits you best. Please follow the steps below to find a set that
suits you best. Please follow the steps below to find the best matching set of Hook Wheels
for your curtain track.
1. Insert the detachable Hook from the bottom gap of your curtain track and rotate it
by 90° to fit. Slide it left and right to see if it operates smoothly, then tilt is back
and forth to check if it attached to your track correctly.

If your Hook cannot be inserted onto your curtain track, or cannot be rotated after
being inserted, replace it with a smaller set of Hook Wheels.

Try pulling your Hook towards one side and tilt it, if it falls easily from the curtain
track, you need to replace it with a bigger set of Hook Wheels.
If the Hook slides smoothly. You can continue the installation steps. If you have tried with
every set of Hook Wheels provided and none of them worked as expected, please contact
our customer support at support@switch-bot.com
6