Firmware Upgrades; Resetting Factory Settings - SwitchBot Curtain 3 U Rail Benutzerhandbuch

Charging, Firmaware Upgrades and Reseting Factory
Settings
Charging
It takes about 6.5 hours to fully charge your device battery, and this can last for up to 8
months after one full charge. You may also purchase SwitchBot Solar Panel to charge
using sunlight.
1. A 5V 1A adapter is required to charge your device.
2. Battery life is tested by opening and closing 8 kg (17 lbs) curtains on a 3-meter-
long track once a day under temperature conditions of 25°C. Actual battery life
may vary depending on different conditions.
3. With only 3 hours per day exposed under sunlight that can cast clear shadow, our
new SwitchBot Solar Panel can generate sufficient power to sustain your SwitchBot
Curtain 3 forever.
The upgraded Solar Panel greatly improved efficiency even under weak sunlight. As
long as your window can receive sunlight, we recommend purchasing our Solar
Panel to charge your device. This way, you can ensure that your SwitchBot Curtain
3 remains powered and ready to use whenever you need it.

Firmware Upgrades

In order to improve user experience, we will regularly release firmware updates to
introduce new functions and solve any software defects that may occur during usage.
When a new firmware version is available, we will send an upgrade notification to your
account via our app. When upgrading, please make sure your product has sufficient
battery and make sure your smartphone is withing range to prevent interference.

Resetting Factory Settings

Use the reset tool provided to press and hold the Reset button for 3 seconds until the
indicator light is visible and then release it.
Please note: you may lose all previous settings after a factory reset and you will need to
add your device to your account again and re-calibrate. If you are using double-sided
curtains, you will need to recalibrate both SwitchBot Curtain 3 devices also.
14