Denon DP-29F Bedienungsanleitung Seite 10

CONNECTIONS
Before beginning
® Turn off components. « To prevent damage to cords, connect and disconnect by holding
® Connect the power cord last the plug, not the cord.
® Connect everything securely. Loose connections can lead to ® Make sure that you connect the white PIN-plug to the left (L-
distortion white) jack and the red PIN-plug to the right (R-red) jack.
— Power cord and plug
Left (White) and Right (Red)
out PIN-plugs
Ground wire
Connections
DP-29F Amplifier
Connect the Left and Right PIN-plugs of the
1 turntable's output cord to your ampli s PHONO
jacks etc.
3 | Connect the ground wire of the turntable to your
amplifier's SIGNAL GND (Ground) terminal securely.
After all connections have been made.
® Connect the turntable's power cord to the AC OUTLET
of your stereo amplifier, optional audio timer or directly
| toahousehold AC outlet.
NOTE:
* If the platter starts rotating when the power cord is
connected, press the STOP button once.