Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3 Operating
1. Turn off the massager before replacing another massage head.
2. Your massager comes equipped with 4 attachments (Figure 1). Attach the different heads by
twisting clockwise (Figure 2), detach the installed massage head by twisting anti-clockwise and
pulling out (Figure 3). Always turn off the device while replacing the heads.
Fig.2
3. Turn on the massager by operating the control buttons (insturctions as below)
4. Apply the massager head lightly to the area you wish to treat. Move the unit slowly, holding it over
the targeted area. Treat the area for a short period of time and move to another area. NEVER treat
the same area for longer than 3 minutes.
5. To turn the unit off by pressing the power button. For your safety the device will automatically turn
off after 15 minutes of continuous use.
Intensity Bu�on
Press to choose High,
Medium,Low
intensity of vibration
Heat Bu�on
Press to turn the
Heat function
on or off
Fig.3
Mode Bu�on
Press to change Mode
between M1 to M3
Power Bu�on
Press to turn the
massager on/off
NOTE: When Power
button indicator turns
green and blink, that
means the battery is low,
please charge in time.
18
Werbung
