Concept SV3050 Bedienungsanleitung Seite 19

EN
PRODUCT DESCRIPTION
1. Hinged top cover
2. Bottom cover
3. Safety closure
4. "Power On" indicator lamp
5. "Heat On" indicator lamp
6. Grip handle
7.
Plate release buttons
8. Sandwich plate
9. Waffle plate
10. Grill plate
11. Pancake plate (SV3055 and SV3057 only)
2
7
8
36
4 5
1
6
3
11
9
10
NEVER IMMERSE THE APPLIANCE
INTO WATER OR OTHER LIQUID!
OPERATING INSTRUCTIONS
Before using the appliance for the first time, wash the toasting surfaces using a wet cloth; in spite of that, we
recommend that the first two pairs of sandwiches should not be eaten.
Food preparation procedure
1. Close the sandwich maker and plug the plug into an
electrical outlet. Make sure that the mains voltage matches
that of the appliance.
2. The power on light and the ready to heat light will come
on.
3. When the green "Heat On" indicator lamp goes off, the
sandwich maker is ready.
4. Open the top cover of the sandwich maker and put
sandwiches on the lower part of the sandwich maker.
Close the sandwich maker.
5. Your food will be ready to be served in approximately
4 minutes or longer as per your taste. Open the lid and
remove the food.
NOTE
• Do not close the sandwich maker by force. A cloud of steam
may rise from in between the toasting surfaces during the
toasting process.
• During the toasting process, the sandwich maker must be
closed using the safety closure. Keep in mind that the "Heat
On" indicator lamp will go on and off as the thermostat
keeps the sandwich maker at proper temperature.
• Open the sandwich maker and remove the sandwiches using a plastic or wooden spatula. Never use a metal knife
as it might damage the non-adhesive coating.
• Close the top cover in order keep the surfaces hot for further toasting.
• During the toasting process, you can prepare your food.
• When finished, unplug the appliance and leave it open to cool down.
EN
4 5
Safety closure
37