EuroLite LED DMF-3 Bedienungsanleitung Seite 24

OPERATION
After connecting the device to the mains it is ready for operation. The display indicates the last operating
mode. The operating modes can be selected by means of the display and the control buttons. All settings
remain stored even if the device is disconnected from the mains. The device can be operated in stand-alone
mode via the control board and the EUROLITE IR-7 remote control or in DMX-controlled mode via any
commercial DMX controller.
Menu structure
Mode
DMX channel
Preset colors
Automatic mode
Sound control
Running speed in
automatic mode and
sound control
Microphone sensitivity
for sound control
Manual color setting
Dimmer
SMD strobe
Sound control silent
scene
Slave mode
IR remote control
Stand-alone mode
Preset colors
In the Stat mode the device will constantly emit one of 24 preset colors or colors combinations.
1 Press the MENU button so many times until Stat is indicated in the display. Confirm with the ENTER
button.
2 Use the buttons UP and DOWN to adjust the desired color or colors combinations. Confirm with the
ENTER button.
Display
22CH
Addr
8CH
Stat S 01-24
Auto Au 1–4
Soun So 1–4
SPEE SP 1-9
SEnS SE 1-9
r000-255
g000-255
b000-255
Colo
U000-255
A000-255
u000-255
diMM dI 1-dI 9
on
Stro
off
on
SILE
oFF
SLAU Slave
on
InFr
oFF
24/32
d001-512 22-channel mode and start address
d001-512 8-channel mode and start address
Constant lighting in one of 24 colors or
color combinations,
only for flower effect
Program 1 - 4
Program 1 - 4
Program running speed
slow > fast
Microphone sensitivity
low > high
Red 0-100%
Green 0-100%
Blue 0-100%
White 0-100%
Amber 0-100%
UV 0-100%
Total brightness (Stat, Auto, Soun,
and Colo modes) dark > bright
Enable SMD strobe program
Disenable SMD strobe program
LEDs off if there is no music signal
LEDs remain on if there is no music
signal
Slave mode
IR remote control on
IR remote control off
Function
00126672, Version 1.0